Filter Sales & Service, Inc - The Leading Source for Air, Liquid and Hepa Filtration

Filter Sales & Service, Inc stocks a comprehensive line of filtration products to meet the needs of our customers. We continually stock new items and products, and also carry custom filtration products and cleanroom supplies from a wide variety of manufacturers. Please feel free to contact one of our office locations, or phone us at 1-800-848-9305 to inquire about products you may need, but may not find on our website.

Pad Media

Dustlok 2 Ply Pad | MFG: Fiberbond

Dual-Ply Dustlok Media

Fiberbond Dual-Ply Dustlok provides the performance of extended surface filters in a unique media design.

Distinct Dual Density provides high-dust holding- long service life. The coarse open structure of the white, air entering layer allows true depth loading. The orange, dense, downstream layer effectively stops and traps finer particles.

Dustlok Adhesive is a Fiberbond proprietary chemical formulation that uniformly coats the fibers in the downstream layer during the formation of the media. Dustlok absorbs dust particles into the adhesive, trapping them on the surface of individual fibers. Dustlok will not dry out or migrate. Operating temperatures up to 200°F do not affect performance.

Spor-Ax Antimicrobial is a biocide that effectively controls growth of mold, mildew, algae and fungi on filters. Fiberbond filters with Spor-Ax do not support microbial growth. Spor-Ax will not off gas, migrate or leach into the airstream.

View Technical Sheet View Available Sizes & Prices

Polyester Pad | MFG: Fiberbond

Fiberbond ~ Polyester Media ~ Depth Loading: The airlaid principle of Fiberbond media is to randomly disperse fibers in all directions throughout the web. This forms a uniform media of high strength and durability. A high volume of contaminants can be trapped within the complete depth of fiber. ~ FP Series of Tackified Media: The FP 50, FP 100, and FP 200 media have a uniform coating of tackifier on all fibers in the blue air leaving side of the media. Dirt trapped in the media is held tight by the tackifier. The tackifier cannot migrate since it is part of the fiber spray bonding process during manufacturing of the filter media.

View Technical Sheet View Available Sizes & Prices

Polyester Roll | MFG: Fiberbond

View Technical Sheet View Available Sizes & Prices

Fiberglass Pads | MFG: Flanders - Precisionaire

View Technical Sheet View Available Sizes & Prices

Kwik Cuts | MFG: Flanders - Precisionaire

Kwik-Cuts ~ These are 15”x24” pads of filter media that can be easily cut to fit any window or wall counted room air conditioner. They are offered in the same spun glass, foam and aluminum media described above. Also offered are 1/2” Permaire and plastic-backed foam.

View Technical Sheet View Available Sizes & Prices

Washable Foam | MFG: Flanders - Precisionaire

Service Rolls ~ air filtration media are manufactured in selected widths, prepared in roll lengths that make manageable roll sizes. In most cases, a single cut across the roll will produce a ready-to-install filter pad. The following media are offered as service rolls: Spun Glass: This is a rigid, nominal 3/8” thick, dry spun glass. It is typically used to make rigid pads for use in room unit air conditioners. It is designed for use without a frame. Since it is untreated, it will not harm the plastic frequently used in the construction of room units. Foam: A rugged polyurethane foam that is designed for use in room unit air conditioners and in pad-holding frames. It is washable and will withstand repeated cleaning with mild soap and water. Foam service rolls are available in 1/4”, 1/2”, 1” and 2” media thicknesses. They are washable for repeat use. Aluminum: The aluminum service roll is an expanded aluminum mesh of the type used in room unit air conditioners. It is a nominal 1/4” thick dry filter media that requires the addition of a dust adhesive for effective filtration.